Whyrl (whyrl) wrote,
Whyrl
whyrl

  • Mood:
  • Music:

Weee000t!!


uClinux/COLDFIRE(m5307)
COLDFIRE port done by Greg Ungerer, gerg@lineo.com
Modified for M5307 by Dave Miller, dmiller@intellistor.com
Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne
Calibrating delay loop.. ok - 59.80 BogoMIPS
Memory available: 2304k/4096k RAM, 0k/0k ROM (389k kernel code, 145k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: ICMP, UDP, TCP
uClinux version 2.0.38.1 (whyrl@PHOENIX) (gcc version 2.95.3 20010315 (release)(
ColdFire patches - 20010318 from http://fiddes.net/coldfire/)(-msep-data patches
)) 2 Thu Aug 8 20:47:05 2002
ColdFire internal UART serial driver version 1.00
ttyS0 at 0x10000200 (irq = 73) is a builtin ColdFire UART
ttyS1 at 0x100001c0 (irq = 74) is a builtin ColdFire UART
ledman: Copyright (C) Lineo, 2000.
Ramdisk driver initialized : 16 ramdisks of 4096K size
Blkmem copyright 1998,1999 D. Jeff Dionne
Blkmem copyright 1998 Kenneth Albanowski
Blkmem 8 disk images:
0: 86190-1AE18F (RO)
1: F0000000-F0003FFF (RW)
2: F0004000-F0005FFF (RW)
3: F0006000-F0007FFF (RW)
4: F0010000-F00EFFFF (RW)
5: F00F0000-F00FFFFF (RW)
6: F0000000-F00FFFFF (RW)
7: F0008000-F000FFFF (RW)
PPP: version 2.3.8 (demand dialling)
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
CSLIP: code copyright 1989 Regents of the University of California.
smc9194.c:v0.12 03/06/96 by Erik Stahlman (erik@vt.edu)
SMC9194: SMC91C94(r:9) at 0x30600300 IRQ:29 INTF:TP MEM:6144b ADDR: 00:d0:cf:00:
01:20
SMC9194: SMC91C94(r:9) at 0x30600000 IRQ:27 INTF:TP MEM:6144b ADDR: 00:d0:cf:00:
01:21
VFS: Mounted root (romfs filesystem) readonly.
Shell invoked to run file: /etc/rc
Command: hostname SecEdge
Command: /bin/expand /etc/ramfs.img /dev/ram0
Command: /bin/expand /etc/ramfs.img /dev/ram1
Command: mount -t proc proc /proc
Command: mount -t ext2 /dev/ram0 /var
Command: mount -t ext2 /dev/ram1 /etc/config
Command: mkdir /var/tmp
Command: mkdir /var/log
Command: /bin/flatfsd -r
FLATFSD: created 12 configuration files (5996 bytes)
Execution Finished, Exiting
Shell invoked to run file: /etc/config/start
Command: ifconfig lo 127.0.0.1
Command: route add -net 127.0.0.0 lo
Command: dhcpcd -p -a eth1 &
[10]
Command: ifconfig eth0 192.168.1.70 netmask 255.255.255.0
Command: route add -net 192.168.1.0 netmask 255.255.255.0 eth0
Execution Finished, Exiting
Shell invoked to run file: /etc/config/firewall
Command: /bin/firewallenv /etc/config/ipfwrules
/bin/firewallenv: Bad command or file name
Execution Finished, Exiting


Sash command shell (version 1.1.1)
/> hello
Hello, World!
/>
Subscribe
  • Post a new comment

    Error

    default userpic

    Your reply will be screened

    Your IP address will be recorded 

    When you submit the form an invisible reCAPTCHA check will be performed.
    You must follow the Privacy Policy and Google Terms of use.
  • 0 comments